850-nm-band amplifier (EDFA, Bench Top)
A bench-top fiber amplifier operating around 850 nm, built on FiberLabs' fluoride fiber amplifier technology. FiberLabs describes it as the only 850-nm-band fiber amplifier on the market, typically paired with a reference transmitter for receiver stress testing of 850 nm transceivers.
Technical overview
The AMP-FL8401 is a single-model bench-top amplifier covering 847 to 853 nm with a nominal wavelength of 850 nm. It delivers at least 20 dB of small-signal gain measured at -30 dBm input, uses HI780 input and output fiber with FC/PC connectors, and carries built-in input and output isolators. Front-panel control is supplemented by RS-232C and GP-IB remote interfaces, with ACC and ALC control modes and remote interlock.
Features
- Only 850-nm-band Fiber Amplifier in Market
- High Gain
- Turn-Key Operation
- RS-232C and GP-IB
Specifications
| Parameter | Value |
|---|---|
| Product number | AMP-FL8401 |
| Operating wavelength | 847 to 853 nm |
| Nominal wavelength | 850 nm |
| Output power | N/A (not specified) |
| Gain (input -30 dBm at nominal wavelength) | >= 20 dB |
| Noise figure | N/A (not specified) |
| Input/output fiber | HI780 |
| Standard connector | FC/PC |
| Input/output isolator | Built In |
| Standard dimensions (H x W x D) | 88 x 260 x 350 mm |
| Monitor & alarm | Input power / Output power / Pump LD current / Pump LD temperature / Case temperature |
| Safety function | Remote Interlock / Interlock with input Alarm |
| Control mode | ACC (Auto Current Control) and ALC (Auto Light Control) |
| Remote interface | RS-232C / IEEE488.1 (GP-IB) |
| Operating temperature | 0 to 40 degC |
| Storage temperature | -10 to 60 degC |
| Power supply | AC 100 to 240 V (50/60 Hz) |
Applications
- Laboratory Use
- Test and Measurement
- Integration in System
You may also like
A bench-top ytterbium-doped fiber amplifier for the 980 nm band, aimed at laboratory, test-and-measurement and system-integration work needing gain around 1 micron.
A bench-top ytterbium-doped fiber amplifier for the 1030 nm band, delivering 20 dBm or more across a broad 1-micron window.
A bench-top praseodymium-doped fluoride fiber amplifier for the O-band, offered in six output-power grades. FiberLabs aims it at high-speed Ethernet transceiver testing and at 1300 nm in-vivo imaging.
Need help specifying this?
Our application engineers will confirm specifications with the manufacturer and quote for your configuration.
Request Info