C-band high-power amplifier (EDFA, Bench Top)
A bench-top high-power C-band EDFA/EYDFA line reaching up to 5 W of output, aimed at amplifying a low-power seed laser in scientific work. A PM version is available.
Technical overview
The AMP-FL8015-CB series covers 1540 to 1560 nm at 1550 nm nominal in five output grades from >= +27 dBm to >= +37 dBm, with noise figure <= 6 dB measured at 0 dBm input. Gain is not specified in the table. All grades use the 88 x 430 x 350 mm chassis with FC/APC connectors on G.652 SMF and built-in isolators, and add return-power monitoring with interlocks on both input and return alarms. FiberLabs notes that with an external 1xN splitter these can serve as multiport amplifiers for FTTH and analogue CATV access networks.
Features
- Proven in Various Deployment Conditions (from R&D to Actual Network)
- High Output Power
- Turn-Key Operation
- RS-232C and GP-IB
Specifications
| Parameter | Value |
|---|---|
| Product numbers | AMP-FL8015-CB-27 / -30 / -33 / -35 / -37 |
| Operating wavelength | 1540 to 1560 nm |
| Nominal wavelength | 1550 nm |
| Output power (input 0 dBm at nominal wavelength) | >= +27 / >= +30 / >= +33 / >= +35 / >= +37 by grade dBm |
| Maximum output power (stated in product description) | up to 5 W |
| Gain | N/A (not specified) |
| Noise figure (input 0 dBm at nominal wavelength) | <= 6 dB |
| Input/output fiber | SMF, G.652 compliant (e.g. SMF28) |
| Standard connector | FC/APC |
| Input/output isolator | Built In |
| Standard dimensions (H x W x D) | 88 x 430 x 350 mm |
| Safety function | Remote Interlock / Interlock with Input Alarm / Interlock with Return Alarm |
| Control mode | ACC (Auto Current Control) and ALC (Auto Light Control) |
| Remote interface | RS-232C / IEEE488.1 (GP-IB) |
| Operating temperature | 0 to 40 degC |
| Storage temperature | -10 to 60 degC |
| Power supply | AC 100 to 240 V (50/60 Hz) |
Applications
- Laboratory Use
- Test and Measurement
- Integration in System
You may also like
A bench-top fiber amplifier operating around 850 nm, built on FiberLabs' fluoride fiber amplifier technology. FiberLabs describes it as the only 850-nm-band fiber amplifier on the market, typically paired with a reference transmitter for receiver stress testing of 850 nm transceivers.
A bench-top ytterbium-doped fiber amplifier for the 980 nm band, aimed at laboratory, test-and-measurement and system-integration work needing gain around 1 micron.
A bench-top ytterbium-doped fiber amplifier for the 1030 nm band, delivering 20 dBm or more across a broad 1-micron window.
Need help specifying this?
Our application engineers will confirm specifications with the manufacturer and quote for your configuration.
Request Info