CWDM amplifier (4-lambda BiDi, In-Line, 1U Rack Mount)

A 1U rack-mount in-line amplifier pair for bi-directional CWDM transmission over a single dark fiber, extending reach regardless of signal format or data rate.

Technical overview

The AMP-FL5711-I4S amplifies 1471, 1491, 1511 and 1531 nm while passing 1551 to 1611 nm; the AMP-FL5711-I4L amplifies 1551, 1571, 1591 and 1611 nm. The two units work at opposite ends of the link. Both deliver >= +0 dBm/ch at -18 dBm/ch input with all four channels amplified simultaneously; gain and noise figure are explicitly not specified. The 43 x 440 x 403 mm chassis uses SC/PC connectors, ACC control and redundant hot-swap AC power.

Conditioning Routing

Features

Optimized for CWDM wavelengths
Monitoring/Logging/Interlocking Function
RS-232C
SNMP Option

Specifications

Specifications
Parameter	Value
Product numbers	AMP-FL5711-I4S; AMP-FL5711-I4L
Operating wavelength (5711-I4S)	1471 +/- 6.5, 1491 +/- 6.5, 1511 +/- 6.5, 1531 +/- 6.5 nm
Operating wavelength (5711-I4L)	1551 +/- 6.5, 1571 +/- 6.5, 1591 +/- 6.5, 1611 +/- 6.5 nm
Output power (input -18 dBm/ch, all four channels simultaneously)	>= +0 dBm/ch
Gain	N/A (explicitly not specified)
Noise figure	N/A (explicitly not specified)
Input/output fiber	SMF, G.652 compliant (e.g. SMF28)
Standard connector	SC/PC
Input/output isolator	Built In
Standard dimensions (H x W x D)	43 x 440 x 403 mm
Control mode	ACC (Auto Current Control)
Safety function	Interlock with input level Alarm
Remote interface	RS-232C / Relay terminal for alarm
Operating temperature	0 to 40 degC
Storage temperature	-10 to 60 degC
Power supply	AC 100 to 240 V (50/60 Hz), Redundant and Hot-Swap
Humidity	5 to 80 % RH (non-condensing)
Safety standards	IEC 60825-1 (JIS C 6802) / CE marking (EN 61010-1 / EN 61326-1)