C-band amplifier (EDFA, OEM Module)
C-band EDFA gain modules in MSA and half-MSA form factors for integration into optical instruments.
Technical overview
The AMP-GB9011-CB booster line offers >= +19 or +22 dBm output with >= 35 or 40 dB gain and NF <= 6 dB; the AMP-GB9013-CB pre-amplifier line offers >= +13 to +19 dBm output with >= 25 to 30 dB gain and NF <= 5 dB. Both cover 1530 to 1560 nm at 1550 nm nominal (header quotes 1530 to 1565 nm) in an 18 x 120 x 90 mm module running from DC 5.1 to 5.4 V under ACC control. No PDF datasheet is published on the product page.
Features
- Proven in Various Deployment Conditions (from R&D to Actual Network)
- RS-232C connection
- Evaluation Board Available
Specifications
| Parameter | Value |
|---|---|
| Product numbers | AMP-GB9011-CB-19 / -22; AMP-GB9013-CB-13 / -16 / -19 |
| Operating wavelength (spec table) | 1530 to 1560 nm |
| Operating wavelength (product header) | 1530 to 1565 nm |
| Nominal wavelength | 1550 nm |
| Output power (input 0 dBm at nominal wavelength) | >= +13 / >= +16 / >= +19 / >= +22 by grade dBm |
| Gain (input -30 dBm at nominal wavelength) | >= 35 (GB9011-CB-19) / >= 40 (GB9011-CB-22) / >= 25 (GB9013-CB-13) / >= 30 (GB9013-CB-16, -19) dB |
| Noise figure (input -30 dBm at nominal wavelength) | <= 6 (GB9011-CB) / <= 5 (GB9013-CB) dB |
| Input/output fiber | SMF, G.652 compliant (e.g. SMF28) |
| Standard connector | FC/PC |
| Input/output isolator | Built In |
| Standard dimensions (H x W x D) | 18 x 120 x 90 mm |
| Humidity | 5 to 80 % RH (non-condensing) |
| Control mode | ACC (Auto Current Control) |
| Safety function | Pump LD shutdown (LDSD) |
| Operating temperature | 0 to 40 degC |
| Storage temperature | -10 to 60 degC |
| Power supply | DC 5.1 to 5.4 V |
Applications
- OEM Integration
- Integration in System
Blocked on: Jake / manufacturer. This block is intentionally styled to be unmistakable — it is not draft copy, it is absent copy.
You may also like
A bench-top fiber amplifier operating around 850 nm, built on FiberLabs' fluoride fiber amplifier technology. FiberLabs describes it as the only 850-nm-band fiber amplifier on the market, typically paired with a reference transmitter for receiver stress testing of 850 nm transceivers.
A bench-top ytterbium-doped fiber amplifier for the 980 nm band, aimed at laboratory, test-and-measurement and system-integration work needing gain around 1 micron.
A bench-top ytterbium-doped fiber amplifier for the 1030 nm band, delivering 20 dBm or more across a broad 1-micron window.
Need help specifying this?
Our application engineers will confirm specifications with the manufacturer and quote for your configuration.
Request Info