O-band amplifier (PDFA, 1U Rack Mount)

A 1U rack-mount O-band PDFA intended for deployment in data centre, access and metro networks rather than on the bench. Amplification is independent of signal format and data rate.

Technical overview

The AMP-FL5601-OB series covers 1280 to 1320 nm at a 1310 nm nominal wavelength in five output grades from >= +10 dBm to >= +20 dBm, with gain from >= 10 dB to >= 35 dB and noise figure <= 7 dB. The 43 x 440 x 403 mm chassis uses SC/PC connectors on G.652 fiber, redundant hot-swap AC power, and RS-232C plus an alarm relay; Ethernet (option -092) and a front control panel (option -151) are offered. FiberLabs notes it can amplify small signals from a network TAP for monitoring applications.

Conditioning Routing

Features

Best performing O-band Fiber Amplifier in Market
Proven Reliability by Actual Network Deployment
High Gain and Low NF
Monitoring/Logging/Interlocking Function
RS-232C
SNMP Option

Specifications

Specifications
Parameter	Value
Product numbers	AMP-FL5601-OB-10 / -13 / -16 / -18 / -20
Operating wavelength	1280 to 1320 nm
Nominal wavelength	1310 nm
Output power (input 0 dBm at nominal wavelength)	>= +10 / >= +13 / >= +16 / >= +18 / >= +20 by grade dBm
Gain (input -30 dBm at nominal wavelength)	>= 10 (-10) / >= 15 (-13) / >= 20 (-16) / >= 25 (-18) / >= 35 (-20) dB
Noise figure (input -30 dBm at nominal wavelength)	<= 7 dB
Input/output fiber	SMF, G.652 compliant (e.g. SMF28)
Standard connector	SC/PC
Input/output isolator	Built In
Standard dimensions (H x W x D)	43 x 440 x 403 mm
Safety function	Interlock with input level Alarm
Control mode	ACC (Auto Current Control) and ALC (Auto Light Control)
Remote interface	RS-232C / Relay terminal for alarm
Operating temperature	0 to 40 degC
Storage temperature	-10 to 60 degC
Power supply	AC 100 to 240 V (50/60 Hz), Redundant and Hot-Swap
Humidity	5 to 80 % RH (non-condensing)
Safety standards	IEC 60825-1 (JIS C 6802) / CE marking (EN 61010-1 / EN 61326-1)