S-band amplifier (TDFA, OEM Module)
S-band TDFA gain modules for integration into optical instruments, with performance FiberLabs states is equivalent to the corresponding bench-top model.
Technical overview
The AMP-GB9211-SB series covers 1460 to 1500 nm (1480 nm nominal) and the AMP-GB9221-SB-16 covers 1470 to 1520 nm (1490 nm nominal). Output grades run >= +13, +16 and +20 dBm with gain from >= 15 dB to Typ. 25 dB and noise figure <= 7 dB. Modules are 35 x 190 x 132 mm, run from DC 5.1 to 5.4 V under ACC control, and are protected by pump LD shutdown. No PDF datasheet is published on the product page.
Features
- Only S-band Fiber Amplifier in Market
- High Gain and Low NF
- RS-232C connection
- Evaluation Board Available
Specifications
| Parameter | Value |
|---|---|
| Product numbers | AMP-GB9211-SB-13 / -16 / -20; AMP-GB9221-SB-16 |
| Operating wavelength (GB9211-SB) | 1460 to 1500 nm |
| Operating wavelength (GB9221-SB) | 1470 to 1520 nm |
| Nominal wavelength | 1480 (GB9211-SB) / 1490 (GB9221-SB) nm |
| Output power (input 0 dBm at nominal wavelength) | >= +13 / >= +16 / >= +20 by grade dBm |
| Gain (input -30 dBm at nominal wavelength) | >= 15 (-13) / >= 20 (-16) / >= 25 (-20) / Typ. 25 (GB9221-SB-16) dB |
| Noise figure (input -30 dBm at nominal wavelength) | <= 7 dB |
| Input/output fiber | SMF, G.652 compliant (e.g. SMF28) |
| Standard connector | FC/PC |
| Input/output isolator | Built In |
| Standard dimensions (H x W x D) | 35 x 190 x 132 mm |
| Humidity | 5 to 80 % RH (non-condensing) |
| Control mode | ACC (Auto Current Control) |
| Safety function | Pump LD shutdown (LDSD) |
| Operating temperature | 0 to 40 degC |
| Storage temperature | -10 to 60 degC |
| Power supply | DC 5.1 to 5.4 V |
Applications
- OEM Integration
- Integration in System
Blocked on: Jake / manufacturer. This block is intentionally styled to be unmistakable — it is not draft copy, it is absent copy.
You may also like
A bench-top fiber amplifier operating around 850 nm, built on FiberLabs' fluoride fiber amplifier technology. FiberLabs describes it as the only 850-nm-band fiber amplifier on the market, typically paired with a reference transmitter for receiver stress testing of 850 nm transceivers.
A bench-top ytterbium-doped fiber amplifier for the 980 nm band, aimed at laboratory, test-and-measurement and system-integration work needing gain around 1 micron.
A bench-top ytterbium-doped fiber amplifier for the 1030 nm band, delivering 20 dBm or more across a broad 1-micron window.
Need help specifying this?
Our application engineers will confirm specifications with the manufacturer and quote for your configuration.
Request Info