S-band amplifier (TDFA, 1U Rack Mount)
A 1U rack-mount S-band TDFA for deployment in optical networks and for footprint-constrained network experiments, including a gain-flattened DWDM model.
Technical overview
The AMP-FL5201-SB series covers 1460 to 1500 nm (1480 nm nominal) and the AMP-FL5221-SB series covers 1470 to 1520 nm (1490 nm nominal), in output grades from >= +13 dBm to >= +19 dBm with typical gain from 13 dB to 30 dB and noise figure <= 7 dB. The AMP-FL5221-SB-19-W adds <= 3 dB gain flatness. The 43 x 440 x 403 mm chassis uses SC/PC connectors, redundant hot-swap AC power and RS-232C with an alarm relay.
Features
- Only S-band Fiber Amplifier in Market
- High Gain and Low NF
- Monitoring/Logging/Interlocking Function
- RS-232C
- SNMP Option
Specifications
| Parameter | Value |
|---|---|
| Product numbers | AMP-FL5201-SB-13 / -16 / -19; AMP-FL5221-SB-16 / -19 / -19-W |
| Operating wavelength (5201-SB) | 1460 to 1500 nm |
| Operating wavelength (5221-SB) | 1470 to 1520 nm |
| Nominal wavelength | 1480 (5201-SB) / 1490 (5221-SB) nm |
| Output power (input 0 dBm at nominal wavelength) | >= +13 / >= +16 / >= +19 by grade dBm |
| Gain (input -30 dBm at nominal wavelength) | Typ. 13 (5201-SB-13) / Typ. 16 (5201-SB-16) / Typ. 19 (5201-SB-19) / Typ. 25 (5221-SB-16) / Typ. 30 (5221-SB-19) / Typ. 24 (5221-SB-19-W) dB |
| Noise figure (input -30 dBm at nominal wavelength) | <= 7 dB |
| Gain flatness (5221-SB-19-W) | <= 3 (gain difference of 1471 and 1511 nm with 1471/1491/1511 nm signals at 0 dBm/ch) dB |
| Input/output fiber | SMF, G.652 compliant (e.g. SMF28) |
| Standard connector | SC/PC |
| Input/output isolator | Built In |
| Standard dimensions (H x W x D) | 43 x 440 x 403 mm |
| Safety function | Interlock with input level Alarm |
| Control mode | ACC (Auto Current Control) and ALC (Auto Light Control) |
| Remote interface | RS-232C / Relay terminal for alarm |
| Operating temperature | 0 to 40 degC |
| Storage temperature | -10 to 60 degC |
| Power supply | AC 100 to 240 V (50/60 Hz), Redundant and Hot-Swap |
| Humidity | 5 to 80 % RH (non-condensing) |
| Safety standards | IEC 60825-1 (JIS C 6802) / CE marking (EN 61010-1 / EN 61326-1) |
Applications
- Telecom Network
- Datacom Network
- Increasing Link Budget
- Loss Compensation
You may also like
A bench-top fiber amplifier operating around 850 nm, built on FiberLabs' fluoride fiber amplifier technology. FiberLabs describes it as the only 850-nm-band fiber amplifier on the market, typically paired with a reference transmitter for receiver stress testing of 850 nm transceivers.
A bench-top ytterbium-doped fiber amplifier for the 980 nm band, aimed at laboratory, test-and-measurement and system-integration work needing gain around 1 micron.
A bench-top ytterbium-doped fiber amplifier for the 1030 nm band, delivering 20 dBm or more across a broad 1-micron window.
Need help specifying this?
Our application engineers will confirm specifications with the manufacturer and quote for your configuration.
Request Info